..

Product Quality Inspections Services In China

ATI offers Quality Inspection services in China to importers all around the world and to help them ensure the quality of their products.

It is not uncommon to find Chinese suppliers misguide you about their production capabilities in order to convince you to work with them. Not only can suppliers exaggerate their production capabilities, but they can in fact outright lie about machinery and equipment that they do not have. After all, who is going to keep an eye on their factory thousands of miles away from you?

How do inspection services in China help you Ensure the Quality of Products you Order?

An inspection service helps you make sure that the quality you receive is the same as that which you are promised by the supplier. This is crucial to make sure that your products are in alliance with your specifications, legal requirements, and products are completely fit for use for your customers.

One of the worst disasters you can face as an importer is if your products result in causing some sort of harm to your customers; this harm may manifest itself in several forms, such as a physical injury due to a faulty product.

What is the process of our Product Inspections In China?

• You submit your product quantities, product details, and supplier contact information.
• An account manager defines a sample size as per the AQL sampling plan or as communicated by the customer.
• Quality parameters are defined as per the category of product. Inspection Plan is made for Major and Minor defects acceptability limit.
• Inspection date is set and the report is shared with the customer in less than 24 hours.
• The defects in the product or packaging are shown by the yellow(Minor) and red (Major) arrow tags. The customer is informed about the final result in the report. Pass/Fail or Hold
• An importer can make timely decisions and have discussions with the supplier regarding issues found during inspection.

Who are we?

ATI is a third party inspection company that provides product Inspection services and factory audit services in China to assist importers in meeting Industry Standards around the world. Our prime objective is to improve the quality of the end product, increase the efficiency of work, decrease the overhead cost, nullify customer complaints and protect brand reputation among valuable customers. Our job is to make sure you get the exact products you are paying for.

We offer the following Quality Inspection Services in China

• Pre Production Inspection Service
• During Production Inspection Service
• Initial Production Inspection Service
• Pre Shipment Inspection Service
• Container Loading Inspection service

Need to check the legitimacy of your supplier? We also offer factory audit services in China.

Got a question? Please use the Live Chat feature or Feel free to give us a call at +852-922-444-95 for a quick discussion about your needs. You can also use the form at the bottom of this page to request a quote.

Pre-Production Quality Inspection

Pre-production inspection is one of the early steps of inspection that we perform before starting the production process or at the very start of final assembly.

What is checked during a pre-production inspection?

• The Raw Materials/Components

• A Prototype/Golden Sample

• The Processes Of Mass Production: As a customer, you would make sure that the supplier does manufacture your product as per your requirement. But going to the factory to check the manufacturing process by yourself doesn’t seem to be possible. Following this issue, our qualified inspectors visit the factory for you in order to verify the whole manufacturing process is being done according to your requirements.

Initial Production Inspection

Initial Production Inspection is a very important inspection service that our inspectors perform in order to check that raw materials used in your product production process meet quality standards or not. Our aim for practicing this inspection step is to give you satisfaction about the quality of your product as soon as production has started.

What do we check when conducting this inspection service?

• Check factory capacity in terms of production and components in order to give an estimated product ready date to the client.
• Ensuring that the quality control unit of the factory does meet quality standards and client’s expectations in professional ways.
• Scrutiny production practices to ensure that all quality control measures do meet the client’s expectations and requirements.
• Verifying quality and quantity of all raw materials going to use in the product’s manufacturing. For predicting any possible mistakes and inform the factory to avoid any mishap or delay. Our inspectors do all these verification steps in order to meet the client’s requirements.

During Production Quality Inspection

DUPRO is the short form for our during production inspection service.

Who should use this inspection service?

• Shipments with a large number of goods.
• A branded product which requires an undisturbed production process
• Important shipments with strict departure time restrictions.
• Reexamination in case if results of the pre-production inspection phase were unacceptable.

What is check during a DUPRO inspection?

At ATI, our trained and certified inspectors will inspect and examine a lot of products to find any possible faults. This inspection occurs after 50-70% completion of products. We will check if there are any type of discrepancies so we can give our professional and expert opinions to the supplier to take measured steps in order to solve the problem.

We believe in providing a full record of every step and every process. That’s why our inspection team submits a full inspection record in the form of reports and photos. This whole record process keeps you updated with the whole manufacturing process.

After a DUPRO inspection, you would be able to find any deviations by the supplier that goes against your contract with the supplier. Our inspection team will keep you updated with updates so you can get things back in order during the production process. Instead of waiting till last minutes

Pre-Shipment/Final Random Inspection

Pre-shipment Inspection is a very important inspection step because this usually takes place before shipping products to the client. So, checking the product before shipping is as important as inspecting during production.

The aim of our pre-shipment inspection service is to:

• Check the product’s quantity and quality.
• Find out any last-minute irregularities and defects in your products.
• Make sure all goods do meet the safety standards and requirements of the target market.

Container Loading Inspection

Container loading is the last step of all inspection services, this inspection makes sure that your product is loaded safely on to the container. Many times loading staff do load products by throwing them or without proper security measures. To avoid such a situation, our inspectors monitor the whole loading process, at ATI we make sure that your product is loaded safely in terms of packaging and amount.

What is checked during our container loading inspection services?

• Keep the record of the container’s arrival time and container’s properties like plate number, color, type, and other details.
• Examine whole container keeping security and safety requirements in concern for the safety of shipment.
• Approve the quantity and condition of your whole shipment with random selection.
• Monitor entire shipment loading activity to make sure that shipment loaded safely without any damage or breakage.
• Note down seal number of the container

How do third party quality inspection services in China help you as an importer?

Swift Inspection Reports That Enable You To Quickly Address Any Potential Problems: It may considerably difficult to operate as an importer. When you’re so far away from your manufacturer, especially keeping in minds the different time zones. If you receive the detailed report outlining all details regarding the products quickly. You have more time to tackle the issues in order to avoid any potential time delays in the production process. In addition to issuing a prompt Quality Inspection report within 24 hours of carrying out a Quality Inspection, most third-party inspection firms also offer you the service of operating very efficiently.

Allowing You Enough Time To Address Any Potential Issues And Defects: A good inspection company will ideally include ample details regarding the products. And the production process so that you can adequately be aware of any issues or defects. The report will include including detailed remarks, photos, measurements, on-site testing results, and more.

Not only do you need time to make an informed decision. On some occasions you might want to have enough time on hand so that you can physically inspect the defected goods yourself via defected samples sent by our team. If you wish to do this, the inspector will send you a sealed sample at your office for review. This is most common in the case of very delicate or highly-priced goods. Or in a case where defects can only be identified when the fabric is felt by hand. If you feel that the defects found in your products are too many or too severe, you may ask the manufacturer to repair or rework the products.

Book a quality inspection or a factory audit now by using the form below