Guide to Quality Inspection for Medical gloves, these are used by professionals in the healthcare industry every day. Medical gloves help protect the wearer from infection and disease, they also make the work environment safer and healthier. Medical gloves can only be used once and are supposed to be disposed after use. They are made of different materials such as Nitrile rubber, neoprene, vinyl and latex.
Are you looking for Medical Gloves suppliers and manufacturers? Our sourcing department can help connect you to the manufacturer that would be best for you. Please get in touch via the Live chat on our website or fill out this form.
There are two types of gloves used in the medical industry. We have exam gloves which do not necessarily need to be sterile since they are used to check patients and handle materials which are sensitive. There are also surgical gloves which have to be sterile and the packaging they come in should also be sterile, Surgical gloves should have more precise sizing in order to make sure they fit perfectly. Surgical gloves have industry standards that need to be followed when being produced, and should be of the highest quality.
What are some main features of medical gloves in terms of Quality Inspections?
- Medical gloves provide the wearer protection from pathogens, disease, bacteria, and other contaminants. They also ensure the wearer does not pass on the bacteria to people they come into contact with, hence they are single use only.
- Medical gloves are skin tight so they do not cause any hindrance to the wearer. This allows surgeons and doctors to perform their tasks with ease
- Medical gloves are waterproof and also able to withstand chemicals
- Medical gloves protect the wearer from sharp needles
What are some standards of medical glove production?
These standards ensure that the material being used is appropriate for use. Sterilization of the gloves is heavily emphasized and is a major part of the production. Medical gloves are a line of defense between healthcare professionals and bacteria etc. Manufacturers are required to use extensive testing when producing medical gloves.
What are the standards for medical glove Quality Inspection?
Acceptable quality limits or AQL is the method used when an inspection for medical gloves is conducted. For medical gloves and AQL of 1.5 or lower is generally use. As an example, if the purchase order is for 100 gloves and quality inspection is based on an AQL of 1.5 or lower. If a mere 3 gloves are found defective, the whole order would be classified as substandard. Rework is done then done in order to ensure the products are brought up to standard.
What testing methods are used when performing Quality Inspections for medical gloves?
There are various tests done in order to ensure the quality of medical gloves. One of the tests is the pinhole test. This test is used because even a small hole can expose the wearer to vulnerabilities. Inspector takes a glove and fills it up with water, he then pokes it with a pin. If there is a leak in the glove due to contact with the pin that means the product has failed inspection.
Another type of test is similar to the pinhole test, which is the watertight test. The watertight test follows the same procedure of filling up the glove with water to ensure there are no leaks. A less accurate for of this test is when air is blown into the glove, then leaks are looked for manually.
Medical Glove Quality Inspection Checklist Should Also Include The Following Checks
- Checks for visual defects such as hair or other particles embedded into the glove, stains, dirt marks, excessive powdering
- Measurements of width and length
- Measurements of thickness (palm, cuff, fingers)
- Check strength of tensile
- Test for elasticity and elongation
- Air and Water leakage test
- Certifications of factory
- Material verification
Conclusion
Although all production facilities try their utmost best to produce products of high standards. Production of defect-free and perfect gloves is impossible. A good manufacturer ensures he is using best practices and tries to minimize defects. We as a third-party quality inspection company try to ensure we eliminate or further minimize all defective products from your shipment. Our inspection services in Vietnam and China will ensure you don’t end up paying for sub-par products.
If you would like for us to conduct a medical gloves inspection for you. Simply “Click Request A Quote” on the website or use the live chat option on our website.